国際学会発表

 
2023年
Ayaka Takazawa, Ayaka Takazawa, Masaki Kakiage*, Hiroki Uehara, Takeshi Yamanobe, Shinichi Asai, Shoko Naruke, Takuya Ohnishi, Yasutake Wakabayashi, Kouki Aoyama, Hiroshi Sekiguchi, "Millisecond-scale analyses during melt-drawing of ultrahigh-molecular-weight polyethylene using synchrotron radiation" (Poster), The 13th SPSJ International Polymer Conference (IPC2023), Sapporo Convention Center, Hokkaido, Japan, July 18-21, 2023.
2022年
Masaki Kakiage*, Ayaka Takazawa, Takeshi Yamanobe, Hiroki Uehara, “Green Processing for Preparation of Ultrahigh-Molecular-Weight Polyethylene Ffibers” (Oral), The 16th Asian Textile Conference (ATC-16), Online, July 27-29, 2022.
Ayaka Takazawa, Takeshi Yamanobe, Hiroki Uehara, Masaki Kakiage*, “Preparation of Ultrahigh-Molecular-Weight Polyethylene Fibers by Melt-Processing” (Poster), The 16th Asian Textile Conference (ATC-16), Online, July 27-29, 2022.113.
Ayaka Takazawa, Masaki Kakiage*, Hiroki Uehara, Takeshi Yamanobe, Yui Shimizu, Takuya Ohnishi, Yasutake Wakabayashi, Kei Inatomi, Shigehiko Abe, Kouki Aoyama, “Melt-Drawing of Reactor Blended Ultrahigh-Molecular-Weight Polyethylene with Bimodal Molecular Weight Distribution” (Poster), 37th International Conference of the Polymer Processing Society (PPS-37), Online, April 11-15, 2022.
2021年
M. Kakiage*, Y. Yoda, R. Hondo, T. Yamanobe, H. Uehara, “Low-Temperature Synthesis of Boron Carbide by Carbothermal Reduction Using Polyols” (Oral), MRM2021 Materials Research Meeting, Yokohama, Japan, December 13-17, 2021.
A. Takazawa, T. Yamanobe, H. Uehara, M. Kakiage*, “Green Processing for Production of High-Performance Ultrahigh Molecular-Weight Polyethylene Fibers” (Oral), MRM2021 Materials Research Meeting, Yokohama, Japan, December 13-17, 2021.
Masaki Kakiage*, Hiroki Uehara, Takeshi Yamanobe, “Preparation of Ultrahigh-Molecular-Weight Polyethylene Fibers by Melt-Spinning and Melt-Drawing” (Poster), The International Chemical Congress of Pacific Basin Societies (PACIFICHEM 2020), Online, December 16-21, 2021.
Ayaka Takazawa, Hiroaki Yoshizawa, Masaki Kakiage*, Hiroki Uehara, Takeshi Yamanobe, Yui Shimizu, Takuya Ohnishi, Yasutake Wakabayashi, Kei Inatomi, Shigehiko Abe, Kouki Aoyama, Hiroyasu Masunaga, “Melt-drawing of Ultra-High Molecular Weight Polyethylene Having Bimodal Molecular Weight Distribution” (Poster), The International Chemical Congress of Pacific Basin Societies (PACIFICHEM 2020), Online, December 16-21, 2021.
Takumi Tsurugai, Tsukino Fukushima, Masaki Kakiage, Hiroki Uehara*, Takeshi Yamanobe, Kouki Aoyama, Hiroyasu Masunaga, “Analysis of Tensile Deformation Behavior of Ethylene-Acrylate Copolymer and Its Ionomer” (Poster), The International Chemical Congress of Pacific Basin Societies (PACIFICHEM 2020), Online, December 16-21, 2021.
Atsuya Higuchi, Tomoya Omata, Masaki Kakiage, Hiroki Uehara*, Takeshi Yamanobe, Yasushi Onumata, Kazuo Tagawa, “Effect of Lubricants Composition on Tribological Properties of Polymer Material” (Poster), The International Chemical Congress of Pacific Basin Societies (PACIFICHEM 2020), Online, December 16-21, 2021.
2019年
Marina Hoshino, Kakiage Masaki, Masaru Yoneyama, Hiroki Uehara, Takeshi Yamanobe*, Daisuke Nagai, Yusuke Shigeta, Shinji Ozoe, “Synthesis and Structural Properties of Hydrogel Having a Sodium Styrenesulfonate Moiety”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
Ayaka Masuda, Masaki Kakiage, Hiroki Uehara, Takeshi Yamanobe*, Kazuki Shimotsu, Ryosuke Kobayashi, Takeshi Ssuzuki, Yoshihiko Inaba, “In-Situ X-ray Diffraction Measurement of Structural Change During Drawing of Nylon 6 Film”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
Nozomi Watanabe, Daiki Tomiya, Masaki Kakiage, Takeshi Yamanobe, Hiroki Uehara*, “Comparison of Melt-Drawability for Different Ultra-High Molecular Weight Polyethylene Materials”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
Hiroaki Yoshizawa, Daiki Nara, Masaki Kakiage, Takeshi Yamanobe, Hiroki Uehara*, Hiroyasu Masunaga, Koki Aoyama, “Effect of Polyethylene Tie Molecules on Actuator Function”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
Saki Saijo, Hiroaki Yoshizawa, Masaki Kakiage, Takeshi Yamanobe, Hiroki Uehara*, Pingfan Chen, Yutaka Kobayashi, “Crystalline Orientation and Mechanical Properties of Compression Molded Polypropylene”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
Akane Kanmura, Tsukino Fukushima, Masaki Kakiage, Takeshi Yamanobe, Hiroki Uehara*, and Seiji Ujiie, “Evaluation of Structure and Physical Properties of Ionic Polyurethane Membrane”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
Kosuke Shuto, Kei Sato, Daiki Nara, Masaki Kakiage, Takeshi Yamanobe, Hiroki Uehara*, Kohtaro Osakada, Daisuke Takeuchi, “Membrane Preparation and Properties of Novel 6-Membered Ring Polyolefin”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
Sayaka Nitta, Hayata Takeda, Masaki Kakiage, Takeshi Yamanobe*, Hiroki Uehara, “Structural Change during Uniaxial Stretching Process of Polyvinyl Alcohol Film”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
Daiki Tomiya, Daiki Nara, Masaki Kakiage, Takeshi Yamaobe, Hiroki Uehara*, “Property Improvement and Structural Development of Ultra-High Molecular Weight Polyethylene Film by Biaxial Melt-Drawing Technique”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
Tomoya Omata, Masaki Kakiage, Hiroki Uehara, Takeshi Yamanobe*, “Influence of High Strength Polyamide Fiber on Friction and Wear Characteristics of Polyamide 6”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
Tsukino Fukushima, Ayako Masuda, Masaki Kakiage, Takeshi Yamanobe, Hiroki Uehara*, “In-Situ X-ray Analysis for Structural Change during Uniaxial Deformation of Ethylene-Styrene Random Copolymer Film”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
Hiroto Suda, Tomoya Omata, Hiroaki Yoshizawa, Masaki Kakiage, Hiroki Uehara, Takeshi Yamanobe*, “Effect of Heating on the Structure and Physical Properties of Poly(vinyl alcohol) Fiber”, S-Membrane International Conference 2019 (SMIC 2019), Kiryu City Performing Arts Center (Kiryu Shimin Bunka Kaikan), Gunma, Japan, September 6, 2019.
2018年
Hidekazu Tanaka, Takeshi Yamanobe, Hiroki Uehara*, “Structural Development during Melt-Drawing of Ultra-High Molecular Weight / Normal Molecular Weight Polyethylene Blend Films with Different Blend Ratios”, The 12th SPSJ International Polymer Conference (IPC2018), International Conference Center Hiroshima, Japan, December 4-7, 2018.
Fumiya Hoshino, Ryunosuke Iwabuchi, Hiroki Uehara, Takeshi Yamanobe*, Masakazu Manaka (Kinugawa Rubber), “Influence of Bound Rubber on Physical Properties of Synthetic Rubber”, The 12th SPSJ International Polymer Conference (IPC2018), International Conference Center Hiroshima, Japan, December 4-7, 2018.
Hayata Takeda, Daisuke Nagai, Masaru Yoneyama, Hiroki Uehara, Takeshi Yamanobe*, Keiko Takahashi, “Evaluation of Physical Properties of Polylactic Acid / Modified Cyclodextrin Complex”, The 12th SPSJ International Polymer Conference (IPC2018), International Conference Center Hiroshima, Japan, December 4-7, 2018.
Hiroki Uehara, Takeshi Yamanobe, “Entanglement Characteristics Evaluated from Melt-Drawing Behaviors”, Macro 2018 Conference, Cairns Convention Cnetre, Cairns, Australia, July 1-5, 2018.
Daiki Nara, Hideyuki Yamashita, Hiroki Uehara,* Takeshi Yamanobe, Tsuyoshi Ikeda, “Investigation of Phase Formation during Sretching for Polyoxymethylene-based Film Containing Ethyleneoxide Comonomer”, Macro 2018 Conference, Cairns Convention Cnetre, Cairns, Australia, July 1-5, 2018.
Hidekazu Tanaka, Hiroki Uehara*, Takeshi Yamanobe, “Structural Deformation during Melt-Drawing of Ultra-High Molecular Weight / Normal Molecular Weight Polyethylene Blend Films with Different Entanglement Characteristics”, Macro 2018 Conference, Cairns Convention Cnetre, Cairns, Australia, July 1-5, 2018.
Hayata Takeda, Hiroki Uehara,* Takeshi Yamanobe, Keiko Takahashi, “Effect of Modified Cyclodextrin on Polylactic Acid / Modified Cyclodextrin Complex”, 4th Gunma International Symposium on Membranes, 2D Matters and Device Application (GIS 2018), Kiryu Area Industry Promotion Center (Kiryu Jibasan Center), Japan, January 17-18, 2018.
81) Fumiya Hoshino, Ryunosuke Iwabuchi, Hiroki Uehara, Takeshi Yamanobe*, Masakazu Manaka (Kinugawa Rubber), “Kneading Time Dependence of Morphology and Physical Properties of Ethylene Propylene Diene (EPDM) Rubber”, 4th Gunma International Symposium on Membranes, 2D Matters and Device Application (GIS 2018), Kiryu Area Industry Promotion Center (Kiryu Jibasan Center), Japan, January 17-18, 2018.
Yui Shimizu, Masahiko Ueno, Hiroki Uehara,* Takeshi Yamanobe, Takuya Onishi, Yasutake Wakabayashi, Kei Inagtomi, Shigehiko Abe, Hiroyasu Masunaga, “Influence of Molding Conditions on Melt-Drawing Behavior of Metallocene-Catalyzed Ultra-High Molecular Weight Polyethylene Film”, 4th Gunma International Symposium on Membranes, 2D Matters and Device Application (GIS 2018), Kiryu Area Industry Promotion Center (Kiryu Jibasan Center), Japan, January 17-18, 2018.
Daiki Nara, Hideyuki Yamashita, Hiroki Uehara,* Takeshi Yamanobe, Tsuyoshi Ikeda, “Investigation of Phase Formation during Stretching for Polyoxymethylene-based Film Containing Ethyleneoxide Comonomer”, 4th Gunma International Symposium on Membranes, 2D Matters and Device Application (GIS 2018), Kiryu Area Industry Promotion Center (Kiryu Jibasan Center), Japan, January 17-18, 2018.
Yuuya Tanaka, Takeshi Yamanobe*, Hiroki Uehara, Masaru Youneyama, “Structure and Physical Property of Semi-Aromatic Polyamides with various methylene length” (Poster), 4th Gunma International Symposium on Membranes, 2D Matters and Device Application (GIS 2018), Kiryu Area Industry Promotion Center (Kiryu Jibasan Center), Japan, January 17-18, 2018.
Ryunosuke Iwabuchi, Hiroki Uehara, Takeshi Yamanobe*, Masakazu Manaka (Kinugawa Rubber), “Effect of Kneading Condition and the Composition on the Structure and Physical Properties of EPDM/PP Thermoplastic Elastomer” (Poster), 4th Gunma International Symposium on Membranes, 2D Matters and Device Application (GIS 2018), Kiryu Area Industry Promotion Center (Kiryu Jibasan Center), Japan, January 17-18, 2018.
Ayako Masuda, Yukiko Isogai, Hiroki Uehara*, Takeshi Yamanobe, Hiroyasu Masunaga (SPring-8), “In-situ Measurement Recorded during Stret8ching Silicone Elastomers to Evaluate Changes in Structure and Properties” (Poster), 4th Gunma International Symposium on Membranes, 2D Matters and Device Application (GIS 2018), Kiryu Area Industry Promotion Center (Kiryu Jibasan Center), Japan, January 17-18, 2018.
75) Hidekazu Tanaka, Hiroki Uehara*, Takeshi Yamanobe, "In-Situ Measurements of Uniaxial Melt-Drawing Behavior fo Ultra-High Molecular Weight / Nomal Molecular Weight Polyethylene Blend Films with Different Entanglement Characteristics", 4th Gunma International Symposium on Membranes, 2D Matters and Device Application (GIS2018), Kiryu Area Inductry Promotion Center, January 17-18 (2018).
2017年
74) Hayata Takeda, Hiroki Uehara, Takeshi Yamanobe*, Keiko Takahashi, "Effect of Modified Cycrodextrin on Polylactic Acid / Modified Cycrodextrin Complex",9th Asian Cycrodextrin Conference (9ACC), National University of Singapore, December 14-17 (2017).
2016年
73) Hiroki Uehara, “Non-Solvent Preparation of Nanostructured Membranes of Ultra-High Molecular Weight Polyethylene by Drawing Technique”, PSE50, Kitakyushu, Japan, December 12, 2016.
72) Yukiko Isogai, Ayako Masuda, Hiroki Uehara*, Takeshi Yamanobe, Hiroyasu Masunaga, Eiichi Akiyama, “Preparation of Silicone Elastomer Composite with Crystalline Component and Its Structural Change during Stretching”, The International Rubber Conference 2016 (IRC 2016), Kitakyushu International Conference Center, Japan, October 24-28, 2016.
71) Ryunosuke Iwabuchi, Hiroki Uehara, Takeshi Yamanobe*, Masakazu Manaka, “Effect of Kneading Conditions on Morphologies and Properties of Thermoplastic Elastomers”, The International Rubber Conference 2016 (IRC 2016), Kitakyushu International Conference Center, Japan, October 24-28, 2016.
70) Ayako Masuda, Yukiko Isogai, Hiroki Uehara*, Takeshi Yamanobe, Hiroyasu Masunaga, “Structural Change during Stretching Silicone Elastomers with Different Cross-linking Characteristics”, The International Rubber Conference 2016 (IRC 2016), Kitakyushu International Conference Center, Japan, October 24-28, 2016.
69) Kashin Xi, Takumi Sakamura, Ayako Masuda, Hiroki Uehara*, Takeshi Yamanobe, Daisuke Takeuchi, “Melting Behavior Analysis and Property Evaluation of Cyclic Polyolefin”, International Conference on Advanced Engineering and Its Education in 2016 (ICAEE 2016), Kiryu (Gunma), October 14 (2016).
2015年
68) Chihiro Narita, Satomi Kato, Hiroki Uehara*, Takeshi Yamanobe, Yasutake Wakabayashi, Kei Inatomi, Shigehiko Abe, “Effect of Molecular Weight Distribution on Melt-Drawing Behavior Ultra-High Molecular Weight Polyethylene”, The International Chemical Congress of Pacific Basin Societies (PACIFICHEM 2015), Honolulu, Hawaii, USA December 15-20, 2015.
67) Yukiko Isogai, Ryosuke Morita, Hiroki Uehara*, Takeshi Yamanobe and Eiichi Akiyama, “Structural and Property Development of Silicone Elastomer Blended with Crystalline Component”, The International Chemical Congress of Pacific Basin Societies (PACIFICHEM 2015), Honolulu, Hawaii, USA December 15-20, 2015.
66) Yoshihisa Takada, Kazuma Morita, Hiroki Uehara, Takeshi Yamanobe* and Keiko Takahashi, “Structure and Physical Property of A Cryclodextrin/Poly(lactic acid) Inclusion Complex”, The International Chemical Congress of Pacific Basin Societies (PACIFICHEM 2015), Honolulu, Hawaii, USA December 15-20, 2015.
65) Takumi Sakamura, Hiroki Uehara*, Takeshi Yamanobe and Tsuyoshi Ikeda, “Preparation of High-Performance Poly(oxymethylene) Film by Drawing Techniques”, The International Chemical Congress of Pacific Basin Societies (PACIFICHEM 2015), Honolulu, Hawaii, USA December 15-20, 2015.
64) Hiroki Uehara, “Non-Solvent Preparation of Nanostructured Membranes of Ultra-High Molecular Weight Polyethylene by Drawing Technique”, The International Chemical Congress of Pacific Basin Societies (PACIFICHEM 2015), Honolulu, Hawaii, USA December 15-20, 2015.
2014年
63) Ryosuke Araki, Keisuke Sunaga, Hiroki Uehara, Takeshi Yamanobe*, “Crystallization Mechanism of PA9T and PA9T Copolymers”, International Union of Mterials Research Societies- The IUMRS International Conference in Asia 2014 (IUMRS-ICA 2014), Fukuoka University, Fukuoka, Japan, August 24-30 (2014).
62) Satomi Kato, Hidekazu Tanaka, Takeshi Yamanobe, Hiroki Uehara*, “In-situ Analysis for Melt-Drawing behavior of Ultra-High Molecular Weight Polyethylene Films with Different Molecular Weights”, International Union of Mterials Research Societies- The IUMRS International Conference in Asia 2014 (IUMRS-ICA 2014), Fukuoka University, Fukuoka, Japan, August 24-30 (2014).
2013年
60) Ryosuke Araki, Keisuke Sunaga, Hiroki Uehara, Takeshi Yamanobe*, “Crystallization Mechanism of PA9T and PA9T Copolymers”, 10th IUPAC International Conference on Advanced Polymers via Macromolecular Engineering, Durham University, United Kingdom, August 18-22 (2013).
59) Satomi Kato, Hidekazu Tanaka, Takeshi Yamanobe, Hiroki Uehara*, “In-situ Analysis for Melt-Drawing behavior of Ultra-High Molecular Weight Polyethylene Films with Different Molecular Weights”, 10th IUPAC International Conference on Advanced Polymers via Macromolecular Engineering, Durham University, United Kingdom, August 18-22 (2013).
58) Hiroki Uehara*, Takeshi Yamanobe, “Nanostructural Formation of Ultra-High Molecular Weight Polyethylene Membranes via Entanglement Arrangement Control”, 10th IUPAC International Conference on Advanced Polymers via Macromolecular Engineering, Durham University, United Kingdom, August 18-22 (2013).
2012年
57) Hiroki Uehara*, Shizuka Wada, Makiko Kano, Hidekazu Tanaka and Takeshi Yamanobe, “Confined Stereo-Complex Crystallization with Property Development of High Molecular Weight Poly(lactic acid) in Block-Copolymer Phase Separation”, International Conference on Advanced Micro-Device Engineering (AMDE 2012), Kiryu (Gunma), December 7 (2012).
56) Hidekazu Tanaka, Hiroki Uehara*, Takeshi Yamanobe, “Structural Deformation during Melt-Drawing of Ultra-High Molecular Weight / Normal Molecular Weight Polyethylene Blend Films with Different Blend Ratios”, International Conference on Advanced Micro-Device Engineering (AMDE 2012), Kiryu (Gunma), December 7 (2012).
55) T. Suzuki, S. Ei, K. Takahashi, H. Uehara, T. Yamanobe, “Thermo physical properties of the cast films of the PLLA are adopted in the MeCD by the DSC and Raman spectroscopy simultaneous measurement (DSC-Raman)”, IUMRS-International Conference on Electronic Materials (IUMRS-ICEM 2012), Pacifico Yokohama (Yokohama, Japan), September 23-28 (2012).
54) T. Suzuki, K. Takahashi, H. Uehara, T. Yamanobe, “The transition analysis technique for the cast films of the PLLA and MeCD complex by a DSC-Raman simultaneous measurement”, 15th International Congress on Thermal Analysis and Calorometry (ICTAC), Kinki University (Osaka, Japan), August 20-24 (2012).
2011年
53) Keisuke Sunaga, Hiroki Uehara, Takeshi Yamanobe*, “Crystallization mechanism of poly(nonamethyleneterephthalamide) as studied by solid state NMR”, The International Symposium on Nuclear Magnetic Resonance 2011 (ISNMR 2011): The 5 Crystallization mechanism of poly(nonamethyleneterephthalamide) as studied by solid state NMR 0th Memorial Annual Meeting of the Nuclear Magnetic Resonance Society of Japan, OSANBASHI Hall (Yokohama, Japan), November 15-18 (2011).
52) Yuka Yokoyama, Hiroki Uehara*, Takeshi Yamanobe, “Effect of Blending Asymmetry for Poly(L-lactic acid)/Poly(D-lactic acid) on Structural Change during Heating”, International Conference on Advanced Micro-Device Engineering (AMDE 2011), Kiryu (Gunma), December 8 (2011).
51) Hidekazu Tanaka, Hiroki Uehara*, Takeshi Yamanobe, “In-situ Measurement of Melt-Drawing Behavior of Ultra-High/Normal Molecular Weight Polyethylene Blend Film”, International Conference on Advanced Micro-Device Engineering (AMDE 2011), Kiryu (Gunma), December 8 (2011).
50) H. Uehara*, M. Kakiage, M. Sekiya, D. Sakuma, T. Yamanobe, N. Takano, A. Barraud, E. Meurville, P. Ryser, “Nanoporous Polyethylene Membranes for Glucose Sensors”, 5th European Conference of the International Federation for Medical and Biological Engineering (EMBEC2011), Budapest, Hungary, 14-18 September (2011).
2009年
49) Masaki Kakiage, Rie Takamatsu, Hiroki Uehara*, Takeshi Yamanobe, “Nano-Platelet Structure of Clay Materials Observed by AFM and Its Application for Polymer Composites”, International Conference on Advanced Micro-Device Engineering (AMDE 2009), Kiryu (Gunma), December 10-11 (2009).
48) Hiroki Uehara*, Tomohiro Obana, Masaki Kakiage, Takeshi Yamanobe, Keita Noguchi, Katsuki Oishi, Eiichi Akiyama (Sagami Chemical Institute), “Phase Transition and Molecular Orientation Behavior of Crystalline Silicon-Based Polymer”, 11th Pacific Polymer Conference 2009, Cairns, Australia, December 6-10 (2009).
47) Yusuke Karaki, Hiroki Uehara*, Takeshi Yamanobe, “Stereo-Complex Crystallization of Poly(lactic acid) Enhanced in Nanospace Confined by Block Copolymer Phase Separation”, 11th Pacific Polymer Conference 2009, Cairns, Australia, December 6-10 (2009).
2007年
46) Takeshi Yamanobe*, Hiroki Uehara and Tadashi Komoto, “Transformation of Crystal Structure of Ultra High Molecular Weight Polyethylene as Studied by Solid State NMR”, The 10th Pasific Polymer Conferenre (PPC 10), Kobe Convention Center, Kobe, December 4-7 (2007).
45) Tomohiro Obana, Masaki Kakiage, Hiroki Uehara* and Takeshi Yamanobe, “Regulated Phase Arrangement of Polystyrene/Poly(dimethylsiloxane) Block Copolymer Film Surface”, The 3rd International Symposium on Development of Silicon-based Functional Materials, Kiryu (Gunma), November 30 (2007).
44) Yasunori Ono, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, Akiyoshi Higuchi, Hiroki Kamiya, Kiyotaka Arai (AGC), Syozo Murakami, Hiroki Uehara*, “Structural Changes during Drawing of Ethylene-alt-Tetrafluoroethylene Copolymer Films as Analyzed by In-situ X-ray Measurements”, 2007 Materials Research Society Fall Meeting, Boston, November 26-30 (2007).
43) Masaki Kakiage, Syozo Murakami, Takeshi Yamanobe, Hiroki Uehara*, “Control of Chain Entanglement Distribution of Polymer Melts by Cyclic Deformation”, 2007 Materials Research Society Fall Meeting, Boston, November 26-30 (2007).
42) Tomoyuki Ichikawa, Masaki Kakiage, Hiroki Uehara*, Takeshi Yamanobe, Daisuke Sawai, “Structure and Property Gradation from Surface to Bulk of Poly(lactic acid) Blend Films As Evaluated by Nano-Scratch Tests Using Scanning Probe Microscopy”, 9th International Symposium on Polymers for Advanced Technologies (PAT2007), Shanghai, China, October 22-25 (2007).
41) Hiroki Uehara*, Masaki Kakiage, Hiroyuki Takeno, Takeshi Yamanobe, Syozo Murakami, Daisuke Sawai, Suong-Hyu Hyon, “Structural Change during Uniaxial Drawing and Annealing from Amorphous Poly(L-lactic acid)”, 9th International Symposium on Polymers for Advanced Technologies (PAT2007), Shanghai, China, October 22-25 (2007).
40) Masaki Kakiage, Takeshi Yamanobe, Tadasi Komoto, Syozo Murakami, Hiroki Uehara*, “Extended-Chain Crystallization during Drawing from Ultra-High Molecular Weight Polyethylene Melts”, 9th International Symposium on Polymers for Advanced Technologies (PAT2007), Shanghai, China, October 22-25 (2007).
39) Masaki Kakiage*, Miho Sekiya, Hiroki Uehara, Takeshi Yamanobe, Tadashi Komoto, “Structural Change with Blending of Crystalline/Amorphous Block Copolymers Having Different Types of Microphase Separations”, The 2nd Gunma International Symposium on Chemistry (GIS2007), Kiryu (Gunma), July 27 (2007).
2006年
38) Tomohiro Obana, Miho Sekiya, Jun-ichi Suwa, Masaki Kakiage, Hiroki Uehara*, Takeshi Yamanobe, Tadashi Komoto, “Self-Assembly of Silicon-Containing Polymeric Materials As Nano-Composite Structure”, The 2nd International Symposium on Development of Silicon-based Functional Materials, Kiryu (Gunma), November 9 (2006).
37) Takeshi Yamanobe*, Kenji Hashizume, Keiko Kano, Hiroki Uehara and Tadashi Komoto, “Transformation of crystal structure of ultra high molecular weight polyethylene as studied by solid state NMR”, The 44th Annual Meeting of Japanese NMR Society and the 1st Asian-Pasific NMR Symposium, Osanbashi Hall, Yokohama, November 9-11 (2006).
36) Jun-ichi Suwa, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, Hiroki Uehara*, “Molecular Weight Segregation on Surfaces of Polyethylene Blend Films as Estimated from Nano-Scratch Tests Using Scanning Probe Microsopy”, 232nd national meetings & expositions of the American Chemical Society, San Francisco, USA, September 10-14 (2006).
35) Takashi Morioka, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, Syozo Murakami, Hiroki Uehara*, “In-Process Analysis for Melt-Drawing Behavior of Polytetrafluoroethylene Using Synchrotron X-Ray Measurements and Resultant Property Development”, 232nd national meetings & expositions of the American Chemical Society, San Francisco, USA, September 10-14 (2006).
34) Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, Syozo Murakami, Hiroki Uehara*, “In-situ SAXS Analysis of Extended Crystallization during Melt-Drawing of Ultra-High Molecular Weight Polyethylene”, 232nd national meetings & expositions of the American Chemical Society, San Francisco, USA, September 10-14 (2006).
33) Hiroki Uehara*, Tomoyuki Yoshida, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, “Nano-Periodic Arrangement of Structural Phases of Polyethylene-block-Polystyrene Copolymer as Induced by Orientation Techniques”, 232nd national meetings & expositions of the American Chemical Society, San Francisco, USA, September 10-14 (2006).
32) Hiroyuki Takeno*, Hiroki Uehara, Syozo Murakami, Naotane Nagasawa, Sono Sasaki, “Structural Development of Dynamically Asymmetric Polymer Blends under Uniaxial Elongation”, XIII International Conference on Small-angle Scattering (SAS 2006), Kyoto International Conference Hall, July 9-13 (2006).
31) Teruaki Onai, Chikashi Doshu, Hiroki Uehara*, Hiroshi Takahashi, Yuzo Yamamoto, “Simultaneous SAXS/WAXD/DSC Study of Phase Behavior of beta-Nucleated and beta-Transcrystallized Polypropylene Films During Heating Process”, XIII International Conference on Small-angle Scattering (SAS 2006), Kyoto International Conference Hall, July 9-13 (2006).
30) Masaki Kakiage, Hiroki Uehara*, Takeshi Yamanobe, Tadashi Komoto, Syozo Murakami, “In-situ SAXS Analysis of Extended Crystallization during Melt-Drawing of Ultra-High Molecular Weight Polyethylene”, XIII International Conference on Small-angle Scattering (SAS 2006), Kyoto International Conference Hall, July 9-13 (2006).
2005年以前
29) Hiroki Uehara*, Rie Takamatsu, Takeshi Yamanobe, Tadashi Komoto, “Nano-Platelet Structure of Clay Materials Observed by AFM and Its Application for Polymer Composites”, The 1st International Symposium on Development of Silicon-based Functional Materials, Kiryu (Gunma), November 21 (2005).
28) Takeshi Yamanobe*, Kenji Hashizume, Keiko Kanou, Hiroki Uehara, Tadashi Komoto, “Transformation of Crystal Structure of Ultra High Molecular Weight Polyethylene as Studied by Solid State NMR”, The 8th SPSJ International Polymer Conference (IPC 2005), Fukuoka, July 26-29 (2005).
27) Hiroki Uehara*, Tatsuki Asakawa, Takeshi Yamanobe, Tadashi Komoto, “Surface Deformation Characteristics of Oriented Poly(ethylene terephthalate) Film as Evaluated from Nano-Scratch Tests with Scanning Probe Microscopy”, 40th IUPAC International Symposium on Macromolecules (IUPAC MACRO 2004), Paris, France, July 4-9 (2004).
26) Masaki Kakiage, Hiroki Uehara*, Takeshi Yamanobe, Tadashi Komoto, Syozo Murakami, “Transient Crystallization during Drawing from Ultra-High Molecular Weight Polyethylene Melts Having Different Entanglement Characteristics”, 40th IUPAC International Symposium on Macromolecules (IUPAC MACRO 2004), Paris, France, July 4-9 (2004).
25) Hiroki Uehara*, Tomomi Hirao, Takeshi Yamanobe, Yuzo Yamamoto, Tadashi Komoto, “Morphology of Polyolefin Reactor Powders and Their Application for Pelletize-Less Processing”, 8th Japan International SAMPE Symposium and Exhibition, Tokyo, November 18-21 (2003).
24) Hiroki Uehara*, Tomoyuki Yoshida, Takeshi Yamanobe, Tadashi Komoto, Masaru Kotera, Syozo Murakami, “In-Situ Observation of Phase Development during Melt-Drawing of Ultra-High Molecular Weight Polyethylene Using Synchrotron Radiation”, 19th Annual Meeting of Polymer Processing Society, Melbourne, Australia, July 7-10 (2003).
23) Hiroki Uehara*, Ryota Yoshida, Rie Takamatsu, Takeshi Yamanobe, Tadashi Komoto, “Morphology of Polyolefin Reactor Powders and Their Application for Pelletize-Less Processing”, IUPAC Polymer Conference on the Mission and Challenges of Polymer Science and Technology (IUPAC-PC2002), Kyoto, December 2-5 (2002).
22) Takeshi Yamanobe*, Katsunori Ueki, Hiroki Uehara, Tadashi Komoto, Minoru Terano, “Morphological and NMR Studies on Nascent Isotactic Polypropylene Powders”, International Symposium on Future Technologies for Polyolefin and Olefin Polymerization Catalysis, Tokyo, March (2001).
21) Taku Aoike, Eri Rikiishi, Hiroki Uehara, Takeshi Yamanobe, Tadashi Komoto*, “Comparison of Macro/Nanotribology of Polymeric Materials, International Tribology Conference, Nagasaki, November (2000).
20) Hiroki Uehara, “Molecular Motion of Ultra-High Molecular Weight Polyethylene Having Different Morphologies”, Roger S. Porter Memorial Symposium, Asilomar Conference Grounds, Pacific Grove, California, USA, February 4-6 (2000).
19) Takeshi Yamanobe, Mihoko Yagi, Hirotoshi Koyano, Hiroki Uehara, Tadashi Komoto*, “Structure and Physical Properties of Poly(butylene-2,6-naphthalate)”, 7th SPSJ International Conference, Yokohama, Japan, October 26-29 (1999).
18) Taku Aoike, Yoshiyuki Ejiri, Hiroki Uehara, Takeshi Yamanobe, Tadashi Komoto*, “Tribology of Polyesters”, 7th SPSJ International Conference, Yokohama, Japan, October 26-29 (1999).
17) Hideo Matsuda, Etsuko Nagayama, Hiroki Uehara, Takeshi Yamanobe, Tadashi Komoto*, “Morphology of Polyethylene Crystallized from Solution and Melt”, 7th SPSJ International Conference, Yokohama, Japan, October 26-29 (1999).
16) Hiroki Uehara, Toshifumi Kobayashi, Yuzo Yamamoto, Tadashi Komoto*, “Crystallization of Isotactic Polypropylene on Selected Surfaces of Nucleating Agent Single Crystal”, 7th SPSJ International Conference, Yokohama, Japan, October 26-29 (1999).
15) Asami Aoyama, Hiroki Uehara, Takeshi Yamanobe, Tadashi Komoto*, “Knot Morphology and Tensile Properties of PVDF Fibers”, International Conference on Advanced Fiber Materials, Ueda, Japan, October 3-5 (1999).
14) Hiroki Uehara, Ayumi Sato, Hideo Matsuda, Takeshi Yamanobe, Tadashi Komoto*, Minoru Terano, “Morphology and Thermal Properties of Nascent Isotactic Polypropylene Powders”, 14th Annual Meeting of Polymer Processing Society, Yokohama, Japan, June 8-12 (1998).