原著論文

  •  
 
Cover Art Galary
左から
高分子学会誌 2000年12月号表紙
Macromolecular Rapid Communication誌 2006年第12号表紙(2006年5月掲載)
Advanced Functional Materials誌 2012年第10号中表紙(2012年5月掲載)
Macromolecular Materials and Engineering誌 2014年第6号表紙(2014年6月掲載)
Macromolecular Materials and Engineering誌 2021年第7号中表紙(2021年7月掲載)
2022年
Hiroaki Yoshizawa, Ayaka Takazawa, Masaki Kakiage, Takeshi Yamanobe, Naoki Hayashi, Maki Hiraoka, Hiroyasu Masunaga, Koki Aoyama, and Hiroki Uehara*, “In-Situ X-ray Analyses of Structural Change during Drawing and Shrinking of Linear Low-Density Polyethylene Film”, J. Robotics Mechatron., 34, 310-315 (2022). DOI: 10.20965/jrm.2022.p0310
Ayaka Takazawa, Masaki Kakiege*, Takeshi Yamanobe, Hiroki Uehara, Yui Shimizu, Takuya Ohnishi, Yasutake Wakabayashi, Kei Inatomi, Shigehiko Abe, Kouki Aoyama, “Effect of blending small amount of high-density polyethylene on molecular entanglements during melt-drawing of ultrahigh-molecular-weight polyethylene”, Polymer, 241, 124528 (2022). DOI: 10.1016/j.polymer.2022.124528
2021年
渡邊希, 髙澤彩香, 山延健, 上原宏樹, 撹上将規*, 「超高分子量ポリエチレンの溶融延伸における原料パウダー種の影響」, プラスチック成形加工学会誌, 34, 103-110 (2022). DOI: 10.4325/seikeikakou.34.103
Hidekazu Tanaka, Ayaka Takazawa, Masaki Kakiage, Takeshi Yamanobe, and Hiroki Uehara*, “Nanoporous Membranes Prepared from Homogeneous Lamellar Structure Developed via Biaxial Melt-Drawing of Ultra-High Molecular Weight Polyethylene / Normal Molecular Weight Polyethylene Blend Films”, Macromol. Mater. Eng., 306, 2100095 (2021). DOI: 10.1002/mame.202100095
Hiroaki Yoshizawa, Ayaka Takazawa, Masaki Kakiage, Takeshi Yamanobe, Naoki Hayashi, Maki Hiraoka, Hiroyasu Masunaga, Koki Aoyama, and Hiroki Uehara*, “Actuation Mechanism of Drawn Polyethylene Evaluated by Structural Change during Cyclic Stretching/Shrinking”, Sens. Actuators A: Phys., 323, 112634 (2021).
DOI: 10.1016/j.sna.2021.112634
狩野真貴子*, 樋口敦也, 伊東寛文, 近藤武志, 撹上将規, 山延健, 上原宏樹, 「スチレンブタジエンゴムの耐候性に与えるひずみ印加の影響」, 日本ゴム協会誌, 94, 87-94 (2021).DOI: 10.2324/gomu.94.87
Hidekazu Tanaka, Saki Saijo, Masaki Kakiage, Takeshi Yamanobe, and Hiroki Uehara*, “In-Situ Analysis for Melt-Drawing Behavior of Ultra-High Molecular Weight Polyethylene / Normal Molecular Weight Polyethylene Blend Films”, Polymer, 213, 123213 (2021). DOI: 10.1016/j.polymer.2020.123213
2020年
Makiko Kano*, Yoshito Otake, Takeshi Yamanobe, and Hiroki Uehara, “Effect of Water Spray on Degradation of Styrene-Butadiene-Rubber During Accelerated Weathering Tests”, Polym. Degr. Stab., 182, 109379 (2020). DOI: 10.1016/j.polymdegradstab.2020.109379
Daisuke Nagai*, Ayaka Kubo, Moeko Morita, Naoyuki Shimazaki, Yasuyuki Maki, Hiroyuki Takeno, Masanobu Mori, Hiroki Uehara, Takeshi Yamanobe, "Pd- and Au-Induced Circular and Fibrous Polymer Gelation via Thiocarbonyl Groups and High Pd Catalyst Activity", ACS Appl. Polym. Mater., 2, 2211-2219 (2020). DOI: 10.1021/acsapm.0c00198
2019年
撹上将規*, 関谷美穂, 東宮大貴, 山延健, 上原宏樹, 「示差走査熱量曲線のピーク分離によるポリエチレン/ポリスチレンブロック共重合体の等温結晶化挙動の解明」, 高分子論文集, 76, 150-156 (2019). DOI: 10.1295/koron.2018-0047
Takeshi Yamanobe*, Hayata Takeda, Yoshihisa Takada, Daisuke Nagai, Masaru Yoneyama, Hiroki Uehara, Keiko Takahashi, “Structure and physical properties of poly(lactic acid) and cyclodextrin composite”, J. Incl. Phenom. Macrocycl. Chem., 93, 117-126 (2019). DOI: 10.1007/s10847-018-0859-0
2018年
Shin-ichiro Kato*, Haruka Kano, Ken-ichi Irisawa, Ryuichiro Yamamoto, Chitoshi Kitamura, Daiki Nara, Takeshi Yamanobe, Hiroki Uehara, Yosuke Nakamura*, “2,4,5,7,9,10- Hexaethynylpyrenes: Synthesis, Properties, and Self-Assembly”, Org. Lett., 20, 7530-7534 (2018). DOI: 10.1021/acs.orglett.8b03290
岩淵龍之介, 永井大介, 米山賢, 上原宏樹, 山延健*, 眞中将一, 「試料組成および練り時間が熱可塑性エラストマーの物性と構造に与える影響」, 高分子論文集, 75, 337-346 (2018). DOI: 10.1295/koron.2017-0084
Shin-ichiro Kato, Satoshi Jin, Terutaka Kimura, Naoaki Yoshikawa, Daiki Nara, Yoshihito Shiota, Kazunari Yoshizawa, Ryo Katoono, Takeshi Yamanobe, Hiroki Uehara, Yosuke Nakamura*,"Trithiazolyl-1,3,5-triazines bearing decyloxybenzene moieties: syntheses, photophysical and electrochemical properties, and self-assembling behavior", Org. Biomol. Chem., 16, 3584-3595 (2018). DOI: 10.1039/C8OB00471D
2017年
Nobutaka Takahashi, Shin-ichiro Kato, Minoru Yamaji, Masahiko Ueno, Ryunosuke Iwabuchi, Yui Shimizu, Masashi Nitani, Yutaka Ie, Yoshio Aso, Takeshi Yamanobe, Hiroki Uehara, Yosuke Nakamura*, “Tetraalkoxyphenanthrene-Fused Hexadecadehydro[20]- and Tetracosadehydro[30]annulenes: Syntheses, Characterizations, Electronic Properties, and Self-Assembly”, J. Org. Chem., 82, 8882-8896 (2017). DOI: 10.1021/acs.joc.7b01165
眞中将一*, 岩淵龍之介, 小薬次郎, 上原宏樹, 山延健, 「動的粘弾性による新しい架橋型熱可塑性エラストマーの評価方法の検討」, 日本ゴム協会誌, 90, 183-189 (2017). DOI: 10.2324/gomu.90.183
Shin-ichiro Kato, Keitaro Watanabe, Misaki Tamura, Masahiko Ueno, Masashi Nitani, Yutaka Ie, Yoshio Aso, Takeshi Yamanobe, Hiroki Uehara, and Yosuke Nakamura*, “Tetraalkoxyphenanthrene-Fused Thiadiazoloquinoxalines: Synthesis, Electronic, Optical, and Electrochemical Properties, and Self-Assembly”, J. Org. Chem., 82, 3132-3143 (2017). DOI: 10.1021/acs.joc.7b00084
2016年
Cheol Min Yun, Eiichi Akiyama, Takeshi Yamanobe, Hiroki Uehara, Yu Nagase*,"Characterizations of PDMS-graft copolyimide membrane and the permselectivity of gases and aqueous organic mixtures", Polymer, 103, 214-223 (2016). DOI: 10.1016/j.polymer.2016.09.044
Hiroki Uehara*, Mina Ishizuka, Hidekazu Tanaka, Makiko Kano and Takeshi Yamanobe, “Stereocomplex Poly(lactic acid) Nanoparticles Crystallized through Nanoporous Membranes and Application as Nucleating Agent”, RSC Adv., 6, 13971-13980 (2016). DOI: 10.1039/C5RA25688G
2015年
Hiroki Uehara*, Takuya Tamura, Hideyuki Yamashita, Takeshi Yamanobe and Hiroyasu Masunaga, “Phase Transition during Heating of Nanostructured Ultra-High Molecular Weight Polyethylene Membrane”,J. Phys. Chem. B,119, 15909-15918 (2015). DOI: 10.1021/acs.jpcb.5b07086
Satomi Kato, Hidekazu Tanaka, Takeshi Yamanobe and Hiroki Uehara*, “In Situ Analysis for Melt-Drawing Behavior of Ultra-High Molecular Weight Polyethylene Films with Different Molecular Weights: Roles of Entanglements on Oriented Crystallization”, J. Phys. Chem. B, 119, 5062-5070 (2015). DOI: 10.1021/jp512246d
Daisuke Nagai*, Takaya Kuribayashi, Hidekazu Tanaka, Hisatoyo Morinaga, Hiroki Uehara and Takeshi Yamanobe, “A Facile, Selective, High Recovery System for Rare Metal Based on Complexation Between Melamine and Cyanuric Acid”, RSC Adv., 5, 30133-30139 (2015). DOI: 10.1039/c5ra04473a
磯貝由紀子, 森田涼介, 上原宏樹*, 山延健, 秋山映一, 「結晶性成分を導入したシリコーン・エラストマーの相構造制御および物性評価」, 高分子論文集, 72, 110-117 (2015). DOI: 10.1295/koron.2014-0067
Hiroki Uehara*, Yasunori Ono, Masaki Kakiage, Takumi Sakamura, Hiroyasu Masunaga, Yasumasa Yukawa, Yoshiaki Higuchi, Hiroki Kamiya and Takeshi Yamanobe, "Property Development for Biaxial Drawing of Ethylene-Tetrafluoroethylene Copolymer Films And Resultant Fractural Behavior Analyzed by In Situ X-ray Measurements”, J. Phys. Chem. B, 119, 4284-4293 (2015). DOI: 10.1021/jp509093g
2014年
Toshiyuki Suzuki, Ayaka Ei, Yoshihisa Takada, Hiroki Uehara, Takeshi Yamanobe*, Keiko Takahashi, “Modification of physical properties of poly(L-lactic acid) by addition of methyl-beta-cyclodextrin”, Belstein J. Org. Chem., 10, 2997-3006 (2014). DOI: 10.3762/bjoc.10.318
Hiroki Uehara*, Makiko Kano, Hidekazu Tanaka, Satomi Kato, Hiroyasu Masunaga and Takeshi Yamanobe, “Nanoporous Morphology Control of Polyethylene Membranes by Block Copolymer Blends”, RSC Adv., 4, 42467-42477 (2014). DOI: 10.1039/C4RA01676A
Hiroaki Horiuchi*, Takayuki Kano, Hiroki Uehara, Tetsuo Okutsu, “Sono-activeatable photosebnsitizer for photodynamic therapy”, Chem Lett., 43, 1423-1425 (2014). DOI: 10.1246/cl.140403
Hiroki Uehara*, Yuuki Arase, Ken Suzuki, Yasumasa Yukawa, Yoshiaki Higuchi, Yasuhiko Matsuoka and Takeshi Yamanobe, “Highly Transparent and Robust Poly(tetrafluoroethylene) Membrane Prepared by Biaxial Melt-Drawing”, Macromol. Mater. Eng., 299, 669-673 (2014). DOI: 10.1002/mame.201300310
Hiroki Uehara*, Takuya Tamura, Kazuki Hashidume, Hidekazu Tanaka and Takeshi Yamanobe, “Non-Solvent Processing for Robust but Thin Membrane of Ultra-High Molecular Weight Polyethylene”, J. Mater. Chem. A, 2, 5252-5257 (2014). DOI: 10.1039/C3TA15125E
Hiroki Uehara*, Masazumi Saitoh, Ryosuke Morita, Eiichi Akiyama** and Takeshi Yamanobe, “In-situ NMR Measurement of Novel Silicone Elastomer Obtained by Cross-Linking of Silicones Having Phenylene Backbone and Hyperbranched Molecular Architectures”, Macromolecules, 47, 888-896 (2014). DOI: 10.1021/ma402291e
Hiroki Uehara*, Masaki Kakiage, Hidekazu Tanaka and Takeshi Yamanobe, “In-situ SAXS Analysis during Uniaxial Drawing of Polyethylene-block-Polystyrene Copolymer Film”, Key Eng. Mater., 596, 50-54 (2014). DOI: 10.4028/www.scientific.net/KEM.596.50
Hiroki Uehara*, Tomohiro Obana, Masaki Kakiage, Hidekazu Tanaka, Hiroyasu Masunaga, Takeshi Yamanobe and Eiichi Akiyama**, “Robust and Transparent Membrane of Crystalline Silicone via Melt-Drawing Technique”, J. Mater. Chem. C, 2, 373-381 (2014). DOI: 10.1039/C3TC31265H
2013年
Toshiyuki Suzuki, Keiko Takahashi, Hiroki Uehara, Takeshi Yamanobe*, “Application and analysis of a DSC-Raman spectroscopy for indium and poly(lactic acid)”, J. Therm. Anal. Calorim., 113, 1543-1549 (2013). DOI: 10.1007/s10973-013-3098-z
Shin-ichiro Kato, Nobutaka Takahashi, Hidekazu Tanaka, Atsushi Kobayashi, Toshitada Yoshihara, Seiji Tobita, Takeshi Yamanobe, Hiroki Uehara, and Yosuke Nakamura*, “Tetraalkoxyphenanthrene-Fused Dehydroannulenes: Synthesis, Electronic, Optical, and Electrochemical Properties, and Self-Assembly”, Chemistry - A Euro. J., 19, 12138-12151 (2013). DOI: 10.1002/chem.201301262
Yuka Yokoyama, Hiroki Uehara* and Takeshi Yamanobe, “Effect of Blending Asymmetry for Poly(L-lactic acid)/Poly(D-lactic acid) on Structural Change during Heating”, Key Eng. Mater., 534, 71-75 (2013). DOI: 10.4028/www.scientific.net/KEM.534.71
 
2012
Hiroki Uehara*, Tomohiro Obana, Masaki Kakiage, Ei-ichi Akiyama** and Takeshi Yamanobe, “Phase Transition of Poly(tetramethyl-p-silphenylenesiloxane) As Revealed by In-Situ X-ray and NMR Measurements”, Macromolecules, 45, 7446-7453 (2012). DOI: 10.1021/ma300881q
Hiroki Uehara*, Hidekazu Tanaka and Takeshi Yamanobe, “Solid-State 1H-NMR Relaxation Behavior for Ultra-High Molecular Weight Polyethylene Reactor Powders Having Different Morphologies”, Polym. J., 44, 795-801 (2012). DOI: 10.1038/pj.2012.104
Takeshi Yamanobe*, Katsunori Ueki, Tadashi Komoto, Hiroki Uehara, “Structure And Molecular Mobility of Nascent Isotactic Polypropylene Powders”, Polym. J., 44, 764-771 (2012). DOI: 10.1038/pj.2012.121
山延健*、撹上将規、宮崎紀明、森田翔、上原宏樹、「高分子材料の延伸過程におけるin-situ NMR測定法の開発と応用」、高分子論文集, 69, 235-241 (2012). DOI: 10.1295/koron.69.235
Hiroki Uehara*, Takuya Tamura, Masaki Kakiage and Takeshi Yamanobe, “Nanowrinkled and Nanorporous Polyethylene Membrane via Entanglement Arrangement Control”, Adv. Funct. Mater., 22, 2048-2057 (2012). DOI: 10.1002/adfm.201102474
Hiroshi Takahashi*, Kenichiro Shimada, Yuzo Yamamoto and Hiroki Uehara, “Reconstruction of Calorimetric Curves from X-ray Diffraction Data during the Melting-Recrystallization Process of Polymers: Simultaneous Calorimetric/X-ray Diffraction Measurements of Isotactic Polybutene-1 in Form III”, J. Macromol. Sci., Pt.B: Phys., 51, 338-347 (2012). DOI: 10.1080/00222348.2011.596795
2011年
Masaki Kakiage, Miho Sekiya, Takeshi Yamanobe, Hiroki Uehara*, “Structural Change with Blending of Crystalline/Amorphous Block Copolymers Having Different Types of Microphase Separations”, Polymer, 52, 6146-6153 (2011). DOI: 10.1016/j.polymer.2011.11.004
Susumu Haruta, Hiroaki Misawa, Kosei Ueno, Yukie Yokota, Hiroki Uehara, Hiroshi Hiratsuka, Hiroaki Horiuchi, Tetsuo Okutsu*, “Protein Crystallization Induced by Strong Photons-molecules Coupling Fields Photochemical Reaction”, J. Photochem. Photobio. A: Chem., 221, 268-272 (2011). DOI: 10.1016/j.jphotochem.2011.03.012
Yasunori Ono, Masaki Kakiage, Takeshi Yamanobe, Yasumasa Yukawa, Yoshiaki Higuchi, Kiyotaka Arai, Hiroki Kamiya, Hiroki Uehara*, “Structural and property changes during uniaxial drawing of ethylene-tetrafluoroethylene copolymer films as analyzed by in-situ x-ray measurements”, Polymer, 52, 1172-1179 (2011). DOI: 10.1016/j.polymer.2010.12.040
Masaki Kakiage*, Rie Takamastu, Hiroki Uehara*, Takeshi Yamanobe*, Keizo Suzuki, “Nano-Platelet Structure of Clay Materials Observed by Atomic Force Microscope”, Key Eng. Mater., 459, 57-61 (2011). DOI: 10.4028/www.scientific.net/KEM.459.57
2010年
Hiroki Uehara*, Yusuke Karaki, Shizuka Wada and Takeshi Yamanobe, “Stereo-Complex Crystallization of Poly(lactic acid)s in Block-Copolymer Phase Separation”, ACS Appl. Mater. Interfaces, 2, 2707-2710 (2010). DOI: 10.1021/am1005755
Masaki Kakiage, Takuya Tamura, Syozo Murakami, Hiroshi Takahashi, Takeshi Yamanobe and Hiroki Uehara*, “Hierarchical Constraint Distribution of Ultra-High Molecular Weight Polyethylene Fibers with Different Preparation Methods”, J. Mater. Sci., 45, 2574-2579 (2010). DOI: 10.1007/s10853-010-4228-7
Masaki Kakiage, Tomoyuki Ichikawa, Takeshi Yamanobe, Hiroki Uehara*, Daisuke Sawai, “Structure and Property Gradation from Surface to Bulk of Poly(L-lactic acid)/Poly(D-lactic acid) Blended Films as Estimated from Nanoscratch Tests Using Scanning Probe Microscopy”, ACS Appl. Mater. Interfaces, 2, 633–638 (2010). DOI: 10.1021/am900896q
2009年
Hiroki Uehara*, Masaki Kakiage, Miho Sekiya, Tsukasa Yamagishi, Takeshi Yamanobe, Katsuhiko Nakajima, Toshio Watanabe, Kumiko Nomura, Kohei Hase, Masatoshi Matsuda, “Novel Design Solving the Conductivity vs Water-Uptake Trade-Off for Polymer Electrolyte Membrane by Bicontinuous Crystalline/Amorphous Morphology of Block Copolymer”, Macromolecules, 42, 7627-7630 (2009). DOI: 10.1021/ma901361s
Hiroki Uehara*, Masaki Kakiage, Miho Sekiya, Daisuke Sakuma, Takeshi Yamanobe, Nao Takano, Antoine Barraud, Eric Meurville*, Peter Ryser, “Size-Selective Diffusion in Nanoporous but Flexible Membranes for Glucose Sensors”, ACS Nano, 3, 924-932 (2009). DOI: 10.1021/nn8008728
2008年
Masaki Kakiage, Hiroki Uehara* and Takeshi Yamanobe, “Novel In-Situ NMR Measurement System for Evaluating Molecular Mobility during Drawing from Highly Entangled Polyethylene Melts”, Macromol. Rapid Commun., 29, 1571-1576 (2008). DOI: 10.1002/marc.200800316
Masaki Kakiage, Miho Sekiya, Takeshi Yamanobe, Tadashi Komoto, Sono Sasaki, Syozo Murakami, Hiroki Uehara*, “Phase Transitions upon Heating for Melt-Drawn Ultra-High Molecular Weight Polyethylenes Having Different Molecular Characteristics”, J. Phys. Chem. B, 112, 5311-5316 (2008). DOI: 10.1021/jp709782g
2007年
Takashi Morioka, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, Hiroki Kamiya, Yoshiaki Higuchi, Kiyotaka Arai, Syozo Murakami, Hiroki Uehara*, “Oriented Crystallization from Poly(tetrafluoroethylene) Melt Induced by Uniaxial Drawing”, Macromolecules, 40, 9413-9419 (2007). DOI: 10.1021/ma071898g
Hiroki Uehara*, Kaori Kato, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, “Single-Walled Carbon Nanotube Nucleated Solution-Crystallization of Polyethylene”, J. Phys. Chem. C, 111, 18950-18957 (2007). DOI: 10.1021/jp074005v
Masaki Kakiage, Miho Sekiya, Takeshi Yamanobe, Tadashi Komoto, Sono Sasaki, Syozo Murakami, Hiroki Uehara*, “In-Situ SAXS Analysis of Extended-Chain Crystallization during Melt-Drawing of Ultra-High Molecular Weight Polyethylene”, Polymer, 48,7385-7392 (2007). DOI: 10.1016/j.polymer.2007.10.018
上原宏樹*,「分子鎖絡み合いと異方性制御による汎用性高分子の高性能化」, 高分子論文集, 64, 525-538 (2007). DOI: 10.1295/koron.64.525
Hiroki Uehara*, Kei-ichi Takeuchi, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, “Nano-Periodic Arrangement of Crystal/Amorphous Phases Induced by Tensile Drawing of Highly Entangled Polyethylene Solid”, Macromolecules, 40, 5820-5826 (2007). DOI: 10.1021/ma070915z
Hiroki Uehara*, Ayako Uehara, Masaki Kakiage, Hiroshi Takahashi, Syozo Murakami, Takeshi Yamanobe, Tadashi Komoto, “Solid-State Characterization of Polyethylene Reactor Powders and Their Structural Changes upon Annealing”, Polymer, 48, 4547-4557 (2007). DOI:10.1016/j.polymer.2007.05.064
Jun-ichi Suwa, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto and Hiroki Uehara*, “Molecular Weight Segregation on Surfaces of Polyethylene Blend Films as Estimated from Nano-Scratch Tests Using Scanning Probe Microscopy”, Langmuir, 23, 5882-5885 (2007). DOI: 10.1021/la070150o
V. Galitsyn, S. Gribanov, M. Kakiage, H. Uehara, S. Khizhnyak, P. Pakhomov, E. Moeller, V. Nikitin, V. Zakharov and A. Tshmel*, “Straight-Chain-Length Distributions in UHMWPE Reactor Powders of Different Morphological Types”, Int. J. Polym. Anal. Charact.,12, 221-230 (2007). DOI: 10.1080/10236660701245264
Hiroyuki Takeno*, Hiroki Uehara, Shozo Murakami, Mikito Takenaka, Myung Im, Naotane Nagasawa, and Sono Sasaki, “Structural Development of Dynamically Asymmetric Polymer Blends under Uniaxial Stretching”, J. Appl. Crystallogr., 40, s656-s661 (2007). DOI: 10.1107/S0021889807008497
Yuzo Yamamoto, Yuichi Inoue, Teruaki Onai, Chikashi Doshu, Hiroshi Takahashi and Hiroki Uehara*, “Deconvolution Analyses of Differential Scanning Calorimetry Profiles of beta-Crystallized Polypropylenes with Synchronized X-ray Measurements”, Macromolecules, 40, 2745-2750 (2007). DOI: 10.1021/ma062784s
Takeshi Yamanobe*, Yoshihito Kurihara, Hiroki Uehara and Tadashi Komoto, “Structure and Characterization of Nylon 46”, J. Mol. Struct., 829, 80-87 (2007). DOI: 10.1016/j.molstruc.2006.06.010
Hiroki Uehara*, Hiroyuki Kimura, Asami Aoyama, Takeshi Yamanobe and Tadashi Komoto, “Effects of Knot Characteristics on Tensile Breaking for Polymeric Monofilament”, New J. Phys., 9, 65.1-15 (2007). DOI: 10.1088/1367-2630/9/3/065
Taku Aoike, Daisuke Yokoyama, Hiroki Uehara*, Takeshi Yamanobe, Tadashi Komoto, “Tribology of Ultra-High Molecular Weight Polyethylene Disks Molded at Different Temperatures”, Wear, 262, 742-748 (2007). DOI: 10.1016/j.wear.2006.08.006
2006年
Hiroki Uehara*, Ryota Yoshida, Masaki Kakiage, Takeshi Yamanobe and Tadashi Komoto, “Continuous Film Processing from Ultra-High Molecular Weight Polyethylene Reactor Powder and Mechanical Property Development by Melt-Drawing”, Ind. Eng. Chem. Res., 45, 7801-7806 (2006). DOI: 10.1021/ie060821y
Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, Syozo Murakami, Hiroki Uehara*, “Transient Crystallization during Drawing from Ultra-High Molecular Weight Polyethylene Melts Having Different Entanglement Characteristics”, Polymer, 47, 8053-8060 (2006). DOI: 10.1016/j.polymer.2006.07.073
Hiroki Uehara*, Tomomi Hirao, Takeshi Yamanobe, Tadashi Komoto, Yuzo Yamamoto, “High-Performance Polypropylene Film Prepared from Reactor Powders Having Different Characteristics”, Polymer, 47, 7145-7152 (2006). DOI: 10.1016/j.polymer.2006.07.065
Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, Syozo Murakami, Hiroki Uehara*, “Effects of Molecular Characteristics and Processing Conditions on Melt-Drawing Behavior of Ultra-High Molecular Weight Polyethylene”, J. Polym. Sci., Polym. Phys. Ed., 44, 2455-2467 (2006). DOI: 10.1002/polb.20883
Hiroki Uehara*, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, Syozo Murakami, “Phase Development Mechanism during Drawing from Highly Entangled Polyethylene Melts”, Macromol. Rapid Commun., 27, 966-970 (2006). DOI: 10.1002/marc.200600199
Hiroki Uehara*, Tomoyuki Yoshida, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, Kumiko Nomura, Katsuhiko Nakajima, and Masatoshi Matsuda, “Nanoporous Polyethylene Film Prepared from Bicontinuous Crystalline/Amorphous Structure of Block Copolymer Precursor”, Macromolecules, 39,3971-3974 (2006). DOI: 10.1021/ma0601316
Hiroki Uehara*, Tomoyuki Yoshida, Masaki Kakiage, Takeshi Yamanobe, Tadashi Komoto, “Structural Arrangement of Crystalline/Amorphous Phases of Polyethylene-block-Polystyrene Copolymer as Induced by Orientation Techniques”, J. Polym. Sci., Polym. Phys. Ed., 44, 1731-1737 (2006). DOI: 10.1002/polb.20829
Hiroki Uehara*, Tatsuki Asakawa, Masaki Kakiage, Takeshi Yamanobe and Tadashi Komoto, “Surface-Deformation Characteristics of Uniaxially-Oriented Poly(ethylene terephthalate) Film as Evaluated from Nano-Scratch Tests with Scanning Probe Microscopy”,Langmuir, 22, 4985-4991 (2006). DOI: 10.1021/la0601612
Katherina Tsobkallo, Valeria Vasilieva, Masaki Kakiage, Hiroki Uehara, and Alexandre Tshmel*, “Remnant Features in Melt Crystallized Samples of Polyethylenes Originated from Reactor Powders”, J. Macromol. Sci., Phys., 45, 407-415 (2006). DOI: 10.1080/00222340600639787
2005年以前
Jun-ichi Harasawa, Hiroki Uehara, Takeshi Yamanobe, Tadashi Komoto*, Minoru Terano, “Morphology of drawn syndiotactic polypropylene films”, J. Mol. Struct., 610, 133-142 (2002). DOI: 10.1016/S0022-2860(02)00047-9
Jun-ichi Harasawa, Hiroki Uehara, Takeshi Yamanobe and Tadashi Komoto*, “Morphology of melt-crystallized syndiotactic polypropylene”, J. Electron Microsc., 51, 157-166 (2002). DOI: 10.1093/jmicro/51.3.157
Taku Aoike*, Tomokazu Ikeda, Hiroki Uehara, Takeshi Yamanobe and Tadashi Komoto, “Control of Tribological Properties with a Series of Random Copolymers”, Langumir, 18, 2949-2951 (2002). DOI: 10.1021/la011643a
Hiroki Uehara*, Taku Aoike, Takeshi Yamanobe and Tadashi Komoto, “Solid-State 1H-NMR Relaxation Analysis of Ultra-High Molecular Weight Polyethylene Reactor Powder”, Macromolecules, 35, 2640-2647 (2002). DOI: 10.1021/ma010464x
Masahiko Okamura, Takeshi Yamanobe, Tomohiro Arai, Hiroki Uehara, Tadashi Komoto*, Seiichi Hosoi, Tatsuo Kumazaki, “Synthesis and Properties of Radiopaque Polymer Hydrogels II: Copolymers of 2,4,6-Triiodophenyl- or N-(3-carboxy-2,4,6-triiodophenyl)-acrylamide and p-Styrene Sulfonate”,J. Mol. Struct., 602-603, 17-28 (2002). DOI: 10.1016/S0022-2860(00)00557-3
Taku Aoike*, Takahiro Yamamoto, Hiroki Uehara, Takeshi Yamanobe and Tadashi Komoto, “Surface Deformation Properties of Polystyrene as Evaluated from the Morphology of Surfaces Scratched by Using the Tip of a Scanning Force Microscope”, Langmuir, 17, 5688-5692 (2001). DOI: 10.1021/la0102962
松田秀夫, 青池卓, 上原宏樹*, 山延健, 甲本忠史, 「ラメラ厚分布と融解プロファイルの比較から求めたポリエチレン結晶の表面自由エネルギー」, 高分子論文集, 58, 326-331 (2001).
Hiroki Uehara*, Hideo Matsuda, Taku Aoike, Takeshi Yamanobe, Tadashi Komoto, “Lamellar Characteristics Controlled by Prior Polymer Concentration for Solution-Crystallized Ultra-High Molecular Weight Polyethylene”, Polymer, 42, 5893-5899 (2001). DOI: 10.1016/S0032-3861(00)00911-3
Hideo Matsuda, Taku Aoike, Hiroki Uehara*, Takeshi Yamanobe, Tadashi Komoto, “Overlapping of Different Rearrangement Mechanisms upon Annealing for Solution-Crystallized Polyethylene”, Polymer, 42, 5013-5021 (2001). DOI: 10.1016/S0032-3861(00)00893-4
Taku Aoike*, Hiroki Uehara, Takeshi Yamanobe and Tadashi Komoto, “Comparison of Macro- and Nanotribological Behavior with Surface Plastic Deformations of Polystyrene”, Langmuir, 17, 2153-2159 (2001). DOI: 10.1021/la001326o
Masahiko Okamura, Hiroki Uehara, Takeshi Yamanobe, Tadashi Komoto*, Seiichi Hosoi, Testuo Kumazaki, “Synthesis and Properties of Radiopaque Polymer Hydrogels: Polyion Complexes of Copolymers of Acrylamide Derivatives Having Triiodophenyl and Carboxyl Groups and p-Styrene Sulfonate and Polyallylamine”, J. Mol. Struct., 554, 35-45 (2000). DOI: 10.1016/S0022-2860(00)00557-3
Hiroki Uehara*, Takeshi Yamanobe and Tadashi Komoto, “Relationship between Solid-State Molecular Motion and Morphology for Ultra-High Molecular Weight Polyethylene Crystallized under Different Conditions”, Macromolecules, 33, 4861-4870 (2000). DOI: 10.1021/ma9918957
Mitsuhiro Nakae, Hiroki Uehara, Tetsuo Kanamoto*, Anagnostis E. Zachariades, Roger S. Porter, “Structure Development upon Melt Drawing of Ultra-High Molecular Weight Polyethylene : Effect of Prior Thermal History”, Macromolecules, 33, 2632-2641 (2000). DOI: 10.1021/ma991330a
松田秀夫, 吉田信貴, 上原宏樹*, 山延健, 甲本忠史, 「パウダー試料の電子染色法及びそのポリエチレン単結晶試料への応用」, 高分子論文集, 56, 702-708 (1999). DOI: 10.1295/koron.56.702
Masayuki Nagai, Koh Nakamura, Hiroki Uehara, Tetsuo Kanamoto*, Yoshiyuki Takahashi, Takeo Furukawa, “Enhanced Electrical Properties of Highly Oriented Poly(vinylidene fluoride) Films Prepared by Solid-State Coextrusion”, J. Polym. Sci., Polym. Phys. Ed., 37, 2549-2556 (1999). DOI: 10.1002/(SICI)1099-0488(19990915)37:18<2549::AID-POLB1>3.0.CO;2-S
Mitsuhiro Nakae, Hiroki Uehara, Tetsuo Kanamoto*, Toshio Ohama, Roger S. Porter, “Melt Drawing of Ultra-High Molecular Weight Polyethylene : Comparison of Ziegler- and Metallocene-Catalyzed Reactor Powders”, J. Polym. Sci., Polym. Phys. Ed., 37, 1921-1930 (1999). DOI: 10.1002/(SICI)1099-0488(19990801)37:15<1921::AID-POLB16>3.0.CO;2-M
Hiroki Uehara, Mitsuhiro Nakae, Tetsuo Kanamoto*, Anagnostis E. Zachariades, Roger S. Porter, “Melt Drawability of Ultra-High Molecular Weight Polyethylene”, Macromolecules, 32, 2761-2769 (1999). DOI: 10.1021/ma981491z
Ryoukei Endo, Kazuhiro Jounai, Hiroki Uehara, Testuo Kanamoto*, Roger S. Porter, “Uniaxial Drawing of Polytetrafluoroethylene Reactor Powder by Extrusion Plus Cold Draw”, J. Polym. Sci., Polym. Phys. Ed., 36, 2551-2562 (1998). DOI: 10.1002/(SICI)1099-0488(199810)36:14<2551::AID-POLB8>3.0.CO;2-V
Hiroki Uehara, Mitsuhiro Nakae, Tetsuo Kanamoto*, Osamu Ohtsu, Akira Sano and Kazuo Matsuura, “Structural Characterization of Ultra-High Molecular Weight Polyethylene Reactor Powders Based on Fuming Nitric Acid Etching”, Polymer, 39, 6127-6136 (1998). DOI: 10.1016/S0032-3861(98)00102-5
Hiroki Uehara, Kazuhiro Jounai, Ryoukei Endo, Hiroshi Okuyama, Testuo Kanamoto* and Roger S. Porter, “High Modulus Films of PTFE Prepared by Two-Stage Drawing of Reactor Powder”, Polym. J., 29, 198-200 (1997).DOI: 10.1295/polymj.29.198
永井雅之, 上原宏樹, 金元哲夫*, 「ポリフッ化ビニリデンの延伸および延伸物の構造と物性:初期形態および延伸法の効果」,高分子論文集, 53, 555-562 (1996). DOI: 10.1295/koron.53.555
Hiroki Uehara, Tetsuo Kanamoto*, Akiyoshi Kawaguchi, Syozo Murakami, “Real-Time X-ray Diffraction Study on Two-Stage Drawing of Ultra-High Molecular Weight Polyethylene Reactor Powder above the Static Melting Temperature”, Macromolecules, 29, 1540-1547 (1996). DOI: 10.1021/ma951222y
Hiroki Uehara, Yoshihiro Yamazaki and Tetsuo Kanamoto*, “Tensile Properties of Highly Syndiotactic Polypropylene”, Polymer, 37, 57-64 (1996). DOI: 10.1016/0032-3861(96)81599-0
上原宏樹, 山崎善啓, 大竹千賀, 金元哲夫*, 「シンジオタクチックポリプロピレンの熱的性質」, 高分子論文集, 51, 597-604 (1994). DOI: 10.1295/koron.51.597